How to fix a door that won t latch

How to fix a door that won t latch , Do you have an interior door that just doesn’t want to close or can’t seem to stay shut ? have you ever had doors that refuse to close and latch for any reason ?

it can be frustrating, But fear not, There are steps you can take to address the issue. especially if you don’t know how to fix them.


There are also a number of problems you may encounter

  • door won’t latch strike plate.
  • door latch not springing back.
  • door knob won’t latch.
  • how to fix a door lock that won’t lock.
  • door won’t lock when closed.
  • door latch not extending fully.
  • how to fix door latch gap.
  • how to fix a door that hits the frame.


Today I’m going to teach you how to fix a door that won’t close, and it’s EASY!

Here’s a guide on how to fix a door that won’t latch.




how to fix a door that won t latch



How to fix a door that won t latch


  • 11 Tips on How to Fix a Door That Won’t Close


  1. Inspect the Latch Plate:
    • Examine the latch plate on the door frame. Check for any visible obstructions, debris, or misalignment that may prevent the latch from engaging.
  2. Loosen the Latch Plate Screws:
    • If the latch plate is misaligned, use a screwdriver to slightly loosen the screws securing it to the door frame. This will allow you to adjust the position of the plate.
  3. Adjust the Latch Plate Position:
    • Move the latch plate slightly in the direction needed for the latch to engage properly. Make small adjustments and test the door each time until the latch engages securely.
  4. Tighten the Screws:
    • Once you’ve adjusted the latch plate, tighten the screws securely. Ensure that the plate is firmly attached to the door frame.
  5. Check for Alignment Issues:
    • Inspect the door itself for any alignment issues. If the door has sagged or shifted, it may not align with the latch properly. Adjust the hinges if necessary to improve alignment.
  6. Examine the Latch Mechanism:
    • Inspect the latch on the edge of the door. Check for any damage, wear, or misalignment. If the latch is visibly damaged, it may need to be replaced.
  7. Lubricate the Latch:
  8. Check the Strike Plate:
    • Inspect the strike plate on the door frame. Ensure that it aligns properly with the latch. If necessary, adjust the position of the strike plate or replace it if it’s damaged.
  9. Adjust the Door Alignment (If Needed):
    • If the door is not hanging evenly on the hinges, you may need to adjust the hinge screws. Tighten or loosen them as necessary to achieve proper door alignment.
  10. Consider Adding a Shim (For Sagging Doors):
    • If the door is sagging, you can add a thin wooden shim behind one of the hinges to help lift and align the door.
  11. Test the Door:
    • Close and open the door several times to ensure that the latch engages smoothly and securely. Make further adjustments if needed.



If you’ve gone through these steps and the door still won’t latch, or if there are structural issues with the door or frame, it may be advisable to consult with a professional carpenter or door specialist for a more comprehensive assessment and repair.

Share your love

Leave a Reply

Your email address will not be published. Required fields are marked *